Dell PowerEdge 1750 PowerEdge RAID Controller 4/Di Firmware Update Version: 413O TABLE OF CONTENTS 1.0 Introduction 2.0 Performing the Firmware Upgrade 3.0 Minimum recommended ESM, System BIOS, and driver levels 4.0 Fixes or Enhancements 5.0 Important Information 6.0 Change History 1.0 Introduction This firmware update delivers bug fixes and enhancements for the PowerEdge Expandable RAID Controller 4/Di in PowerEdge 1750 systems. 2.0 Performing the Firmware Upgrade Webpack Instructions: This program creates a bootable diskette to upgrade the firmware of the controllers. You will need a formatted 3 1/2 inch floppy diskette for the following procedure. 1) Download the file to a directory on your hard drive. The file downloaded is a self extracting executable. 2) Insert a blank diskette into the system's diskette drive. 3) Double click on the file that you downloaded and follow the instructions on the screen to extract the files to the diskette. 4) Insert the diskette into the system with the RAID controller for which you want to update the firmware and boot the system. 5) Follow the instructions on the screen to update the firmware. NOTICE: Pflash.exe will be executed automatically and will report existing code level and prompt you to reconfirm before starting the firmware upgrade process. To perform this process in non-interactive mode please execute, Pflash /? and read about possible command line switches. 6) Remove the diskette and reboot the system. Windows Update Package Instructions: Download 1. Click the "Download Now" link to download the file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive. Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Install any necessary Embedded Systems Management firmware prior to this BIOS update. 5. Click the Install button. 6. Follow the remaining prompts to perform the update. The Update Package can also be used with Dell OpenManage Server Administrator. See the Dell Update Package User's Guide for more information. Linux Update Package Instructions: To install, enter the following on the command line: rpm -Uvh linflash-3.03-0.i386.rpm You must copy the firmware image to the same directory for the linux flash utility to work. Create a diskette image of the firmware and copy the .rom file to the same directory as linflash. Usage : linflash [-r] [-p] [-s] [-i [file] [file] [...]] [-f [file] [file] [...]] -r : Flash without asking for user input to flash adapter(s). -p : Prompt user for filename. Flash without checking for signatures. -s : Silent flash. First matching image file will be taken for each adapter. -i : Ignore the following files. These files will not be considered for flashing the matching controllers. -f : Force the following files To be flashed for the matching controller. In case more than one matching files are specified, the first one would be taken. To uninstall the rpm, enter the following command: rpm -e linflash 3.0 Fixes or Enhancements Component Current Version Previous Version Firmware 413O 412W BIOS H418 H406 Ctrl-M U821 U812 Boot Block 2.1.2 1.0.6 Bug Fixes: 1. Addressed issues found with the Firmware status Queue. This was causing the firmware to post status completion of command IDs still in progress, causing the driver to reuse those command IDs. 2. Addressed an issue in the media error counter logic when drives with media errors are replaced. 3. Improved rebuild logic to handle multiple media error in the same array in corner case conditions. 4. Improved Firmware error handling and messages for TBBU related events. Enhancements: 1. Improve firmware behavior and reporting when a multi-bit error is encounter at boot time. If an unrecoverable (multi-bit) error is encountered, during a cache scrub at initialization, the cache is re-initialized. 2. Improve the Firmware interrupt handling for all possible interrupts and takes specific actions based on the type and source of the interrupt. 3. Improve firmware failure algorithm for failed drives based on SAF-TE information. 4. Improved firmware error handling for cable pulled/removed situations. 5. Improved firmware algorithm and error handling for drive roaming scenarios and deleted Logical Disks. 6. Improved error logging and debug information collection when the firmware hangs or crashes. 7. Improved BIOS status reporting and messaging during POST. 8. Improved error firmware handling when drives return Hardware Error (sense key code 04) in some configurations. 4.0 Important Information Firmware upgrade while controller is doing background I/O task Firmware upgrade process will fail if any background I/O task (i.e. RAID-5 background consistency check or power on auto-resume rebuild and reconstruction) is being performed. The program will stop at the "Flash Download" screen with the following message: "Consistency Check of logical drive(s) in progress for adapter-X. Failed Writing Image on Adapter X with Baseport ...". Firmware and configuration on the adapter will not be modified by the program. A reboot can be performed to return to the Operating System. Wait until the background task completes before updating the firmware. Universal CRTL-M: Multiple adapters can be configured from CRTL-M, but currently selected adapter should be verified before performing any configuration changes using the Select Adapter option. Drive Migration: When hard drives are moved from one controller to another, the target controller configuration must be cleared to ensure a configuration mismatch does not occur. FlexRAID: FlexRAID Virtual Sizing is no longer supported by the current firmware (v.412W) and should be disabled prior to firmware flash. This can be performed from CRTL-M by accessing Objects -> Logical drive -> View/Update Parameters -> FlexRAID Virtual Sizing and will need to be performed for each logical drive present. 5.0 Change History Change from 4.10 to 4.12W Component Current Version Previous Version Firmware 412W 4.10 BIOS H406 H111 Ctrl-M U812 7.09 Boot Block 1.0.6 1.0.2 MPT Firmware 1.03.11.05-IT 1.03.06.00-IT Firmware Enhancements 1. Improved hard drive status logic when virtual disks are spanned across channels. 2. Firmware will automatically change cache settings to WriteThru when a battery problem is detected to preserve data. If WriteBack was originally selected, firmware will switch back once battery problem has been corrected. 3. In the Rebuild function of CRTL-M, a new status called “INCON” will be displayed after a rebuild operation completes if any unrecoverable errors are found found in any of the hard disk drives. To identify the location of the error and if any data was present, run a check disk from the O/S (e.g. chkdsk in windows). Note: Dell recommends that a check disk or consistency check should be run after any RAID rebuild operation is completed by the controller. Firmware Bug Fixes 1. When multiple hard drive media errors are encountered, array rebuild operation will complete. 2. Consistency checks are aborted after reboot in cluster or stand alone mode. User must restart consistency check manually if needed. 3. Manual initialization calls will be rejected if a background initialization or consistency check is in progress on the logical drive. 4. Address potential controller lock-ups that could occur during either degraded, rebuilding or multiple drive pull and reinsert scenarios. 5. Addressed potential controller freezing during driver failure on possible Raid configurations. Change from 4.04 to 4.10 Component Current version Previous version Firmware 4.10 4.04 BIOS B111 B109 Ctrl-M 7.09 7.05 WebBios 1.65 1.64 Firmware Bug Fixes 1. Some structures in the MPT target mode structure were not aligned on cache line boundaries. When these structures were invalidated, it caused other data adjacent to these structures (that was dirty) to be forgotten. 2. Added logic to reissue REQUEST_SENSE commands that are failed with a CHECK CONDITION so certain drives will not remain in a Contingent Allegiance condition. Some 160M drives will frequently fail a REQUEST_SENSE command due to CRC errors. These drives remain in a CA condition until an untagged REQUEST_SENSE command is issued. 3. Fixed issue where rebuild might not restart after a reboot 4. Resolved issue where errors on a drive could cause the adapter to hang. 5. Fixed issues where the firmware would start a background initialization during a NVRAM mismatch Ctrl-M Changes 1. Fixed Misspellings 2. Fixed issue where Ctrl-M would hang if user had a combination of PERC 4 DC and PERC 4 Di. Change History from 4.01 to 4.04 Component Current version Previous version Firmware 4.03 4.04 BIOS B109 B109 Ctrl-M 7.05 7.05 WebBios 1.64 1.64/2.27 Firmware Bug Fixes 1. During a state transition, battery HW will sometimes cycle through invalid states. FW was changed to ignore intermittent state changes. 2. Previously the FW would not kick off a negotiation upon insertion. It would also try to transfer at the speed of the previously inserted drive. It now renegotiates all inserted drives. Firmware Enhancements 1. Background initialization for all redundant LDs.