####################################################################### AVOCENT(TM) DIGITAL ACCESS KVM SWITCH VERSION 1.0 ####################################################################### This document contains information about the Avocent Digital Access KVM, which is an optional accessory for the Dell Modular Server Enclosure. For more information about the Avocent Digital Access KVM version 1.0, including installation and configuration information, see the "Dell Remote Access Controller/Modular Chassis User's Guide Version 1.2" located on the Dell Support website at "support.dell.com." ####################################################################### TABLE OF CONTENTS ####################################################################### This file contains the following sections: * Criticality * Minimum Requirements * Supported Systems * Supported Web Browsers * Firmware Update Instructions * Features in This Release (1.0) * Known Issues for Avocent Digital Access KVM Version 1.0 * User Notes * Common Avocent Digital Access KVM Features ####################################################################### CRITICALITY ####################################################################### 2 - Recommended ####################################################################### MINIMUM REQUIREMENTS ####################################################################### The DRAC/MC firmware must be upgraded to version 1.2 before you configure or use the Avocent Digital Access KVM. DRAC/MC firmware versions prior to 1.2 cannot update, configure, or access the Avocent Digital Access KVM. ####################################################################### SUPPORTED SYSTEMS ####################################################################### Avocent Digital Access KVM version 1.0 is supported on the Dell Modular Server Enclosure, previously known as the Dell PowerEdge(TM) 1855 server chassis. ================================================================= SUPPORTED MANAGED SERVER OPERATING SYSTEMS ================================================================= Microsoft(R) Windows Server(R) 2003 Standard Edition SP1 Microsoft Windows Server 2003 Academic Standard Edition SP1 Microsoft Windows Server 2003 Web Edition SP1 Microsoft Windows Server 2003 Enterprise Edition SP1 Microsoft Windows Server 2003 Academic Enterprise Edition SP1 Microsoft Windows Server 2003 Standard x64 Edition Microsoft Windows Server 2003 Enterprise x64 Edition Microsoft Windows(R) 2000 Server SP4 Microsoft Windows 2000 Advanced Server SP4 Microsoft Windows 2000 Academic Advanced Server SP4 Red Hat(R) Enterprise Linux AS 3 Gold x86 Red Hat Enterprise Linux ES 3 Gold x86 Red Hat Enterprise Linux WS 3 Gold x86 Red Hat Enterprise Linux AS 3 Update 2 EM64T Red Hat Enterprise Linux ES 3 Update 2 EM64T Red Hat Enterprise Linux WS 3 Update 2 EM64T Red Hat Enterprise Linux AS 4 Gold x86 Red Hat Enterprise Linux ES 4 Gold x86 Red Hat Enterprise Linux WS 4 Gold x86 Red Hat Enterprise Linux AS 4 Gold EM64T Red Hat Enterprise Linux ES 4 Gold EM64T Red Hat Enterprise Linux WS 4 Gold EM64T ####################################################################### SUPPORTED WEB BROWSERS ####################################################################### * Microsoft Internet Explorer 6.0 on Windows * Mozilla 1.7 or later on Red Hat(R) Enterprise Linux (version 3) * Mozilla Firefox 1.0 or later on Red Hat Enterprise Linux (version 4) ####################################################################### FIRMWARE UPDATE INSTRUCTIONS ####################################################################### NOTE: After you upgrade the KVM firmware, you must delete the Java temporary Internet files from the Java Control Panel. =================================================================== UPDATING THE FIRMWARE USING THE DRAC/MC WEB-BASED USER INTERFACE =================================================================== 1. Extract the “dkvm_01.00.xx.bin” KVM binary file from the firmware update package and copy the file to a TFTP server root directory. 2. Open a supported Web browser and log on to the DRAC/MC Web user interface. 3. In the DRAC/MC GUI main window, click the "Update" tab. 4. In the Firmware Update screen, select "KVM Update". 5. In the KVM Upddate screen, enter the TFTP server address and the KVM firmware image name in the appropriate fields. 6. Click "Update Firmware". NOTE: The TFTP download and firmware update process may take several minutes to complete. After the update completes, the KVM resets. =================================================================== UPDATING THE FIRMWARE USING THE COMMAND LINE INTERFACE (CLI) =================================================================== 1. Extract the "dkvm_01.OO.xx.bin" file from the firmware update package and copy the file to a TFTP server root directory. 2. Log on to the DRAC/MC telnet or serial interface. 3. From the telnet/serial interface, issue the "racadm fwupdate" command. For example: racadm fwupdate -a -d dkvm_01.00.xx.bin -m kvm NOTE: The TFTP download and firmware update process may take several minutes to complete. After the update completes, the KVM resets. ####################################################################### FEATURES IN THIS RELEASE (1.0) ####################################################################### * The DRAC/MC and the Digital Access KVM work together to provide the "Graphical Console Redirection" and "Virtual Media" features. ####################################################################### KNOWN ISSUES FOR AVOCENT DIGITAL ACCESS KVM VERSIONS 1.0 ####################################################################### The following are known issues regarding the Digital Access KVM version 1.0 implementation and operation: * If your client system is running Microsoft Window Server 2003 with Service Pack 1 (SP1), you must disable the Enhanced Security Configuration Feature in Internet Explorer. To disable Enhanced Security Configuration, perform the following steps: 1. On the Windows desktop, click “Start” and select “Settings”--> “Control Panel”--> “Add or Remove Programs”. 2. In the “Add or Remove Windows Components” window, click “Add or Remove Windows Components”. 3. In the “Windows Components” window, deselect “Internet Explorer Enhanced Security Configuration” and click “Next”. 4. When prompted, click “Finish”. 5. Start Internet Explorer. 6. In the “Tools” menu, click “Internet Options”. 7. In the “Internet Options” window, click the “Advanced” tab. 8. Under “Settings”, ensure that “Do not save encrypted pages to disk” is deselected, and click “OK”. 9. Start the DRAC/MC user interface. A dialog box appears, prompting you to save this file. 10. Click “Save” and, when prompted, click “Save” again. The "viewer.jnlp" file is saved to your desktop. 11. When the “Download Complete” dialog box appears, click “Open”. ####################################################################### USER NOTES ####################################################################### * The OSCAR interface supports English, French, German, and Spanish languages. * To access USB memory keys and diskettes on a Red Hat Linux system, you must have block device access. * To change the digital KVM OSCAR language, update the KVM firmware using a language-specific firmware package. * Use the DRAC/MC web interface to configure the KVM and access the digital KVM features. * The Avocent Digital Access KVM and the DRAC/MC must be configured on the same subnet. * To access a recording drive on a Red Hat Linux system, you must mount the drive as a CD-ROM device. * Before you boot to a Virtual Media device, use the Virtual Media application to connect to the drive. * Virtualized devices do not support formatting and partitioning commands. * If you are running a Virtual Media session and you want to change the media in the media device (for example, removing and installing a CD in the virtual CD drive), the Virtual Media session will not recognize the new media. To access the new media, perform the following steps: 1. In the Virtual Media application, click “Disconnect”. 2. Replace the media (for example, install a new CD in the CD drive). 3. Click “Connect”. * Before you boot from a Virtual Media device in a server module, disconnect all direct-attached USB devices from the modules in the Dell Modular Server Enclosure. * If you are running Windows XP(R) on your management station, disable the Internet Connection Firewall before you run a console redirection session. Otherwise, your console redirection session may hang when you access various features in the user interface. * In the user interface “Firmware Update” page and the command line interface, the Digital Access KVM image file name cannot be more than 20 characters (155856). * To create image files from existing bootable media: Linux Users • Use the dd (data duplicator) utility: dd if= of= =input device (for example, /dev/fd0, /dev/cdrom) = output file (for example, myfloppy.img, mycd.iso) Windows Users • A number of utilities are available for creation of floppy and/or ISO images from removable media on Windows when creating CD/DVD image files. Ensure that you use one that supports copying the CD/DVD boot sectors. The following Web addresses provide information on available imaging utilities: • http://www.fdos.org/ripcord/rawrite/ • http://blogs.technet.com/brucecowper/archive/2005/03/09/391268.aspx To create a bootable CD/DVD image file from scratch, use one of the following imaging programs or a program with equivalent features: Imaging Programs for Linux Users • k3b: http://www.k3b.org/ • NeroLINUX: http://www.nero.com/ Imaging Programs for Windows Users • Nero: http://www.ahead.de/ • MediaCreator: http://www.roxio.com/ • Magic ISO: http://www.magiciso.com/ ####################################################################### COMMON AVOCENT DIGITAL ACCESS KVM FEATURES ####################################################################### The following features are available on the Avocent Digital KVM switch. Your system may have updates that enable additional features. * Graphical Console Redirection to the managed server modules * Virtual Media Access * OSCAR user interface For more information about the DRAC/MC, see the "Dell Remote Access Controller/Modular Chassis Version 1.2 User's Guide” located on the Dell Support website at "support.dell.com". ####################################################################### Information in this document is subject to change without notice. (C) 2005 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: "Dell", "PowerEdge", and Dell OpenManage are trademarks of Dell Inc.; "Microsoft" and "Windows" are registered trademarks and ”Windows Server” and “Windows XP” are trademarks of Microsoft Corporation; "Red Hat" is a registered trademark of Red Hat, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. September 2005